Control Catalog Pages

In remote sensing regulators, the bulb is separate from the actuating element of the thermal actuator. The bulb has its connection to the actuator by a flexible capillary of the required length. By closing the valve in opposition to the spring force, the flow of the heating medium gets reduced. Whether your control system ismotorised, pneumaticoder manual– you will receive the appropriately tailored actuator and control principle.
Designed for high vibration service, the valves are qualified to Lloyd’s Marine Requirements for shipboard service. Greg Chambers serves as a Product Manager at Kimray, and is responsible for international products. He collaborates with engineering, manufacturing, and quality teams to optimize product performance and make a difference for our customers.
Damper actuators fail to the pre-designated open or closed position. NEMA 2 enclosures are rated for 24 VAC or 120 VAC power supply, with either on/off, floating or modulating control. van samyang flanged body ANSI 125#, PTFE packing, with bronze pressure balanced plug for higher close off applications. A variety of threaded ports or push-to-connect fittings are also available to attach pneumatic tubing to the valves.
Note, many sparge tubes are designed with a maximum operating pressure in mind. In these cases, a temperature pilot AND a pressure pilot may be needed. The temperature pilot will maintain temperature within the tank and the pressure pilot will prevent the sparge assembly from exceeding it’s designed operating pressure. The temperature control valves are available in various models with different specifications. A valve body contains the modulating element, such as a plug, globe, ball, or butterfly.
Allied Witan Company-Providing noise control solutions to industry for over 50 years. High precision parallel and angular grippers, rotary actuators, feed escapements, linear slides, thrusters, tool changers, and robot clutches. Browse a list of all Schneider Electric products, including legacy products. We empower all to make the most of their energy and resources, ensuring Life Is On everywhere, for everyone, at every moment.
The input signal to the controller is mechanical movement provided by the sensing element that is being used to sense the process. Sensing elements are sized to provide the optimum control for the application. Cast steel wafer or flanged body with segmented characterized v-ball for equal percentage flow control, with high performance stem seal, RTFE seat for zero leakage. By adding a third port, the 3-port or 3-way, 2-position valve can both supply and exhaust pressure.
The control method chosen is often based on the required speed of response, or time constant, of the control loop. Zone temperature control and outdoor reset are both fairly slow control loops. For these, a simple proportional band control with set with a narrow proportional band will often provide excellent service.
The pilot actuated temperature controller has good accuracy in comparison to direct actuated regulators. Sterlco® self-modulating cooling control valves are temperature actuated, self powered, and applicable to cooling processes using water or other fluids. To ensure dependability, every valve is factory-tested three times in different temperature baths.
However, the temperature restrictions will vary depending on the product and the company’s guidelines for rating their products. Double-acting pneumatic actuators are up to 70% smaller in size compared to electric actuators. Sanitary Globe Control Valve type DS with 2 or 3 way body, orientable ways and full Stainless Steel construction, complete valve body and pneumatic diaphragm actuator polishing on request. Available with Pneumatic and Electric actuators besides a full range of Accessories. 3 Way Globe Control Valve type SMD for Mixing or Diverting service, threaded seat, Parabolic or multi-hole plug with double guided trim, Standard or extended bonnet with Low Emission seals on request.